|
|
| New Products |
|
|
3.5mm Coaxial
Calibration Kits
|
GigaLane’s 3.5mm Coaxial Calibration Kits provides highly accurate and repeatable calibration due to own precision machining and RF characterization technologies with competitive price. The precision OPEN, SHORT, LOAD components can be used to calibrate all kind of commercial VNA systems up to 9GHz (Model GCS35M-9G) and 26.5GHz (Model GCS35M-26G), respectively.
  
- 3.5 mm Air Connectors
- Frequency Range :DC to 9GHz, 26.5GHz
- 3.5mm Phase Matched Adapters
- Torque Wrench Included
|
|
| |
|
|
| |
| |
|
Coaxial Micro-Plugs(CMP) Up to 7 GHz
|
The GigaLane Coaxial Micro-Plugs and Receptacles (Fully Compatible with Hirose U.FL Series) are specially designed for Space reduction on Circuit Boards and for Vertical Mounting on RF Boards. They have excellent electrical performance on the right angle transitions up to 7 GHz
- Fully compatible with MuRata GSC series and Hirose U.FL series.
-
DC to 7 GHz (VSWR <1.3).
- Cable Assembly with 0.81 mm, 1.13 mm, 1.30 mm coaxial cable.
- Mated Height : 1.8 mm and 2.5 mm
- Vertical Mounting on receptacle (SMT).
- Excellent electrical transition on right angle section.
|
|
 |
| |
|
|
| |
| |
|
High Performance Flexible Armor Cable Assemblies
|
GigaLane high performance flexible Armor cable assembliesuse very low loss cables and good protection armor cable. It is designed for low VSWR and excellent phase stability. The armor offers protection from humidity and vapors.
- Good Cable Flexibility
- Cable Type : PS series (PSUT4,PSUT8,PS316)
LA series (LA150,LA180,LA230,LA280)
- Good Protection from humidity and vapors
- Useful for outdoor application
|
|
|
|
| |
|
|
| |
| |
|
Edge Mount SMA Connector
|
|
The GigaLane Edge Mount SMA Connector has excellent electrical performance from DC to 24 GHz. It’s designed for applications such as Multi-layer board with coplanar waveguide and single layer board with microstrip.
- DC to 24 GHz
- Easy Installation on RF circuit board
- Useful on Multi-layer board with coplanar waveguide
- Useful on Single-layer board with microstrip
|
* Applications
- RF Test Board
- Chip Set Evaluation Board
|
|
|
 |
| |
|
|
| |
| |
|
2.4 mm & 2.92 mm Connectors
|
|
GigaLane 2.4 mm connectors (P2- series) are designed to optimum RF performance up to 50 GHz. It is compatible with 1.85 mm connectors. It has been well accepted to Space, Military, and Commercial applications.
- DC to 50 GHz
- Mechanically Compatible with 1.85 mm Connectors
- Air Dielectric
- Captivated Center Contact
|
GigaLane 2.92 mm connectors (PK- series) are designed for applications up to 40 GHz. It has a mechanically compatible interface that mates with SMA and 3.5mm connectors. The PK- Series are well suited to applications in components, systems, or instrumentation
- DC to 40 GHz
- Mechanically compatible with SMA and 3.5 mm Connector
- Air Dielectric
- Captivated Center Contact
|
|
|
 |
| |
|
|
| |
| |
|
VEREND SMA Connectors
|
The GigaLane VEREND (Vertical-End launch) SMA connector is designed for applications such as circuit boards for SMD (Surface Mounted Device) and for vertical mounting on RF test boards. It has excellent electrical transition on right angle section up to 18 GHz.
- DC to 18 GHz
- Vertical mounting into circuit boards for SMD.
- Excellent electrical transition on right angle section.
|
|
|
 |
| |
|
|
| |
| |
|
High Performance
Cable Assemblies (150 Series)
|
GigaLane high performance flexible cable assemblies use very low loss cables and connectors designed for low VSWR and excellent phase stability up to 40 GHz.
Repeatability is critical for measuring devices with vector network analyzers.
All cable assemblies are stocked in standard lengths for quick delivery. |
|
 |
| |
|
|
| |
| |
|
Optid DC
BLOCKs
|
GigaLane's Optid DC Block has broadband, low insertion loss performance up to 26. 5 GHz.
It has flat frequency response and low frequency cutoffs as low as 16 kHz.
This unit is used to block DC current or voltage from an RF circuit without affecting the flow of RF through the main transmission path. The Optid DC Block is suitable for High speed & optical communication where test and measurement instrumentation and high speed pulse testing .
- Low Insertion loss ( < 1.0 dB)
- Excellent Return loss
- Suitable for High speed Optical communications
|
|
|
 |
| |
|
|
| |
| |
|
Broadband
Bias Tee
|
GigaLane's Broadband Bias Tees have low insertion loss and broadband performance up to 26.5 GHz.
It is important to have a low frequency cut off and linear transmission of the low frequency spectral components as well. GigaLane's broadband Bias Tees have low cut off frequency of 16 kHz.
The Bias Tees is ideal for RF & Microwave application and for optical communication where laser and photodiode biasing.
- Excellent low insertion & Return loss
- Laser and photodiode biasing
- General RF & Microwave application
- Compact Size
|
|
|
 |
| |
|
|
| |
| |
